Clear see-through design that can be used as a bullet starter, powder measure, palm saver or
two compartment pre-loader. It holds 130 grains of loose powder,
primer and bullet.
$12.95 each
Powder Flask
End cap unscrews for easy, quick and safe loading.
All brass construction holds 5 oz.
$20.95 each
Trophy Bullet Starter
Quiet, non-abrasive, non-glare polymer. Short and long starter is recessed to fit over most bullets.
7.95 each
209 Multiple Capper and Extraction Tool
The only functional multi-primer capper on the
market. Extended neck easily reaches into the inline
breech area. Holds up to seven primers and features a built-in decapper.
$12.95 each
T-Bullet Starter w/ Ramrod Extension
Combo bullet starter and ramrod extension
that is a must for field loading and cleaning.
$14.95 each
Z2 Alloy DEAD-ON One-Piece Base/Ring System
DEAD-ON One-Piece Rail Base/Ring System (HIGH order
medium below)
Fits CVA Apex, Optima Elite Center-Fire Barrels, NEW CVA SCOUT Rifle (all Models) and all 2010 or later Model
CVA Muzzleloaders (Wolf, Optima, Accura V20
This innovative new design uses Z2 Alloy to make it the strongest mount available for your CVA rifle and scope.
The DEAD-ON one-piece system is the fastest way to mount optics on your CVA rifle and will give you years of rock-solid
performance. A one-piece system also means there are fewer parts than can come loose to affect your accuracy.
Plus, the molded Z2 Alloy ensures better ring alignment to grip your scope tighter but
with less stress on the scope tube.
$39.95 each
Z2 Alloy DEAD-ON One-Piece Base/Ring System
Medium height ring/base accommodate 40mm objective scopes and under.
Super RAT with a rotating head!
Read story below.
Have you ever experienced a flyer that you could not explain?
The only thing that you noticed was that when you pushed the sabot
down the barrel, it did not go down smoothly, but with a
"stutter motion".
As you continue to shoot you get that
same "feel" on another load. You are not surprised when
that bullet is also a flyer and without hitting anywhere near the
last flyer.
Upon further examination, what appears to be causing
this is the Super Jag and the bullet have locked up inside the
barrel. That "stutter feeling" was caused when the sabot
was pushed over the lands and grooves rather than rotating in the
lands and grooves.
By backing the Super Jag off the face of your
range rod a couple of treads, you can allow the Jag head to rotate
if the bullet locks up. This appears to solve the problem, but there
must be a better solution.
Enter the "Super RAT" (Rotating
Accuracy Tool).
The world's first jag with a rotating head!
Here is
a rotating bullet pusher, ramrod extension, cleaning jag all in one
Solid Brass U.S. Made tool.
Here are some the advantages to a
rotating head jag.
*keeps the bullet in the lands and grooves while
loading.
*keeps the patch in the lands and grooves while swabbing
*keeps the patch in the lands and grooves while cleaning
*prevents the jag from unscrewing itself during cleaning
*delivers the most accurate loading of sabots and conical bullets
The Super RAT available in .45 and .50 caliber, only $ 16.50
Caldwell E-MAX Standard Profile Hearing Protection
I tested these myself before adding them to my website...When you are wearing them
you hear things going on around you just as if you were not wearing hearing
protection. The real clincher for me, was the silencing of the rifle shot,
yet still being able to hear the bullet strike the target 300 yards away!
J-B® NON-EMBEDDING BORE CLEANING COMPOUND
Cuts Through Toughest Bullet Jacket & Powder Fouling -
Can't-Run Paste Formulation - Cushioned Abrasive Action Leaves Bores Sparkling - Won't "Eat"
Stock Finishes
The original, time-proven formula developed by Jim Brobst and produced under exclusive license.
J-B has been getting burned-on, caked-in powder residue and copper jacket fouling out of gun
barrels since the 1960’s, and hasn’t damaged an inch of rifling yet. Today, J-B once again
proves itself a champion by the way it easily cleans the dirtiest, moly-fouled barrels.
A unique combination of ingredients and a one-of-kind, multi-step mixing process give J-B
its special characteristics. They work together to cushion the abrasive action; the soft paste
liquifies as you use it, then wipes out of the bore easily. The non-embedding feature means
there’s no abrasive residue left behind which might keep "cutting" after you’ve finished
cleaning.
.25 ounce jar $4.95
Solid brass, flask helps eliminate powder waste, adjustable from 30 to 150 grains.
